volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 4189 > < Replacing the Gear-Shift Position Sensor|Page 4184
Page 1
background image

Transmission Speed Sensor: Procedures

Transmission Input Speed Sensor, Replacing

Transmission input speed sensor, replacing 

Note:  As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information is always correct.

Replacing the transmission input speed sensor 
Replacing the transmission input speed sensor V70 -2000 and S80 

Replacing the transmission input speed sensor V70 -2000 
Removing engine compartment components 
Ignition off.

Remove: 

-

the Air Cleaner (ACL) housing and the intake manifold

-

the battery

-

the battery shelf.

Removing the gear selector cable 
Remove: 

-

the screws from the bracket for the gear selector cable

-

the cable from the lever. Move the cable to one side

-

the screws for the large connector. Separate the connector.

Disassembling the large connector 
Remove: 
-

the tie straps around the rubber seal for the connector and cable harness

-

the rubber seal.

Procedures|Page 4189 > < Replacing the Gear-Shift Position Sensor|Page 4184