C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Tighten the screws. Tighten to 25 Nm .
Plug in the connector from the car.
Ensure that the rubber seal is in position in the upper section of the connector.
Install the air cleaner (ACL) housing
See Brake pipe master cylinder / ABS unit, replacing See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and
Repair/Removal and Replacement/Brake Pipe Master Cylinder / ABS Unit, Replacing
Top up the transmission fluid
Note! After replacing the transmission oil, the "Transmission oil change" counter must be reset. See Resetting Transmission fluid change
counter, AW55-50/51SN See: Testing and Inspection/Programming and Relearning/Resetting Transmission Oil Replacement Counter
Checking diagnostic trouble codes (DTCs)
Check and erase any diagnostic trouble codes (DTCs).
