C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Primary locking
Check that the cable terminal is undamaged.
Press the cable terminal into the housing.
Check that the seal is correctly positioned and that the cable terminal is properly locked by pulling carefully on the cable.
Sealed Connector Type 2
Connector sealed, repair
Special tools: 951 2632 Terminal removal tool See: Tools and Equipment/951 2632 Terminal Removal Tool , 951 2639 Terminal removal tool See:
Tools and Equipment/951 2639 Terminal Removal Tool , 951 2852 Terminal removal tool See: Tools and Equipment/951 2852 Terminal Removal Tool
, 951 2853 Terminal removal tool See: Tools and Equipment/951 2853 Terminal Removal Tool.
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Connector, dismantling
Secondary lock
Open the catches and pull out the secondary lock, use tool 951 2853 Terminal removal tool See: Tools and Equipment/951 2853 Terminal Removal
Tool or an electrician's screwdriver, as illustrated.
Primary lock
