volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 776 > < Procedures
Page 2
background image

-

the cargo compartment mat and fold the right-hand wheel house panel under (on certain variants with hard panels, it must be removed).

-

the cable and connector holder. This sits in two clips above the cover for the fuel level sensor.

-

the covers for the fuel pump and fuel level sensor.

-

the protective casing over the fuel level sensor (if fitted). If the protective casing is difficult to remove, slightly loosen the tank strap and filler pipe
so as to adjust the position of the tank.

WARNING:  The tank must be secured with a transmission stand or the like before the bolts of the tank strap are removed.

Marking with tape 

Procedures|Page 776 > < Procedures