C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Tighten the sensor screws lightly.
Install the rubber washer, lock washer and the nut on the gear shift linkage rod connection.
Tighten the nut.
Lock the nut with the lock washer.
Adjusting the gear-shift position sensor
See: Checking and Adjusting the Gear-Shift Position Sensor
Installing the gear-shift position sensor, continued
Install:
-
the cable duct on the screw. Tighten the nut. Tighten to 25 Nm
-
the lever on the gear shift linkage rod. Tighten to 16 Nm.
Installing the gear selector cable
See: Checking and Adjusting the Gear-Shift Position Sensor
Installing engine compartment components
Install:
