volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Sensors and Switches - Wiper and Washer Systems > < Transmission Temperature Sensor/Switch, A/T|Service and Repair|Page 1097
Page 7
background image

Tighten the screws. Tighten to  25 Nm .
Plug in the connector from the car.
Ensure that the rubber seal is in position in the upper section of the connector.

Install the air cleaner (ACL) housing 
See  Brake pipe master cylinder / ABS unit, replacing See: Brakes and Traction Control/Hydraulic System/Brake Hose/Line/Service and
Repair/Removal and Replacement/Brake Pipe Master Cylinder / ABS Unit, Replacing 

Top up the transmission fluid 

Note! After replacing the transmission oil, the "Transmission oil change" counter must be reset. See  Resetting Transmission fluid change
counter, AW55-50/51SN See: Powertrain Management/Transmission Control Systems/Testing and Inspection/Programming and
Relearning/Resetting Transmission Oil Replacement Counter 
 

Checking diagnostic trouble codes (DTCs) 
Check and erase any diagnostic trouble codes (DTCs).

Sensors and Switches - Wiper and Washer Systems > < Transmission Temperature Sensor/Switch, A/T|Service and Repair|Page 1097