C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Control Arm: Removal and Replacement
Control arm front, replacing
Special tools:
998 5434 SEPARATOR L 200 MM See: Tools and Equipment/998 5434 Separator L 200 mm
999 5461 COUNTERHOLD See: Tools and Equipment/999 5461 Counterhold
998 5972 JACK See: Tools and Equipment/998 5972 Jack
951 2050 BEVEL PROTRACTOR See: Tools and Equipment/951 2050 Bevel Protractor
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Preparations
Applies to cars of model years 97-98:
Raise the car.
Remove the wheel.
Install counterhold 999 5461 COUNTERHOLD See: Tools and Equipment/999 5461 Counterhold.
Detach the drive shaft end at the hub Tap in the shaft end approximately 10-15 mm. Use a plastic or copper mallet or use puller 998 5434 SEPARATOR
L 200 MM See: Tools and Equipment/998 5434 Separator L 200 mm together with 999 5461 COUNTERHOLD See: Tools and Equipment/999 5461
Counterhold.
Applies to cars of model years 99-00:
