C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Check that the groove on the ball joint spindle lines up with the screw hole in the wheel spindle.
Note! Press the ball joint upwards so that the conical top is visible above the screwed joint on the wheel spindle.
Use a new locknut in the wheel spindle screw.
Tighten to 50 Nm .
Finishing
Install the wheel. See Installation of items See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and Repair/Removal and
Replacement/Installation Of Items.
