C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Stabilizer Bar: Removal and Replacement
Anti-Roll Bar Front, Replacing
Anti-roll bar front, replacing
Special tools:
999 5006 LIFTING BAR See: Tools and Equipment/999 5006 Lifting Bar
999 5033 SUPPORT See: Tools and Equipment/999 5033 Support
999 5460 Lifting hook See: Tools and Equipment/999 5460 Lifting Hook
Note! On cars of an earlier design the anti-roll bar's bushings and cap are replaceable. On later designs the anti-roll bar's bushings and cap
are vulcanized in the anti-roll bar and with that are not replaceable.
Note! Later designs replace earlier designs of the anti-roll bar.
Install the support rails 999 5033, bracket 999 5006 and lifting yoke 999 5460. Lift up the engine slightly
Note! The following section only applies to right-hand drive cars.
Remove the collision protection system over the steering gear (2 screws)
