C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Note! On early models there is a stamped section for the link fastening in the spring strut. Tighten to 50 Nm (36.9 lb.ft).
Install the ABS sensor cable on the spring strut and to the brake line bracket
Secure the ABS line
On left-hand drive cars:
Secure any ABS line excess on the driver's side of the engine compartment with a tie strap to the vacuum hose to the power brake booster. Secure any
excess on the passenger side in the cable duct at the spring strut turret.
Right-hand drive car
Secure any ABS line excess in the engine compartment with a tie strap at the cable duct at the right and/or left spring strut turret.
Remove support 999 5466
Install wheel
Lubricate hub guide for rims with rustproofing agent, P/N 1161030-0 . Tighten studs lightly. Tighten crosswise to 110 Nm (81.1 lb.ft).
Note! See also Wheels and hubs, front suspension See: Wheels and Tires/Specifications/Mechanical Specifications/Front Suspension
