C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Insert a screwdriver between the casing and socket. Press in the lock while sliding the bases out of the casing.
Detach the base for the transmission input speed sensor from the other bases.
Replacing the sensor
Clean thoroughly around the sensor.
Remove the sensor
Install the new sensor
Apply a little Vaseline to the sensor O-ring. Tighten to 5.5 Nm.
Assembling the connector
Ensure that the rubber seal is in position.
Install the tie straps around the rubber seal.
