volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Shift Solenoid, A/T|Service and Repair|Page 4536 > < Shift Solenoid, A/T|Service and Repair
Page 2
background image

Seal the hole in the transmission with a plastic plug.
Position a container under the radiator drain cock. Drain the engine coolant.

Note! Avoid skin contact with the coolant. 

Close the nipple.

Disconnect the lower hose for the radiator to provide more space for removing the control system cover.

Remove: 

-

the screw for the front engine pad and the sub-frame

-

the screw for the ground lead bracket.

Note! Applies only to cars with parking heaters: 

Remove the 3 screws from the heater on the sub-frame.
Hang or tie up the heater on the left front fender.
Unhook the fuel line from its mountings in the sub-frame.
Lower the vehicle.

Install  999 5716 Reading off tool See: Tools and Equipment/999 5716 Reading Off Tool  directly above the engine lifting eye. Position the lifting beam
brackets as illustrated.

Shift Solenoid, A/T|Service and Repair|Page 4536 > < Shift Solenoid, A/T|Service and Repair