C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Install:
-
The support 999 5033 SUPPORT See: Tools and Equipment/999 5033 Support on the fender edges.
-
Lifting bar 999 5006 LIFTING BAR See: Tools and Equipment/999 5006 Lifting Bar on the support. Place the bar straight above the eye on the
lifting yoke.
-
Lifting hook 999 5460 Lifting hook See: Tools and Equipment/999 5460 Lifting Hook.
Note! When lifting hooks in the early design (A) are used, the hook must be 999 5186 HOOK See: Tools and Equipment/999 5186 Hook
connected between the lifting fork and the lifting hook. Lifting hook, late design (B).
Tightened the hook approximately 5 mm so that the engine pants off-loaded slightly.
-
Measure and note the measurement between the lifting bar and the spark plug cap.
