C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Note! Use new screws, Torx TX50.
Align the torque converter with the carrier plate by turning the engine with the crankshaft pulley nut and turning the torque converter (accessible through
the hole in the cover.)
Fit all 6 screws hand tight. Tightened the screws sufficiently so the heads lie against the carrier plate. Now tightened with 35 Nm . Socket Torx TX 50
(earlier models TX40 must be changed to TX50).
Note! Remove the socket wrench from the crankshaft.