C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Install:
-
Torque stay mounting's bracket on the gearbox.
Note! Use new screws.
Torque: Late design M10, 35 Nm + 40° . Early design M8, 18 Nm + 90° . Use protractor 951 2050 BEVEL PROTRACTOR See: Tools and
Equipment/951 2050 Bevel Protractor
-
The screws for the brackets for the oil pipe. Torque: 25 Nm .
Tighten the clamp for the exhaust pipe.
Jiggle the pipes during tightening.
Installing the right drive shaft
