C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Reassemble the socket for the gear-shift position sensor with the other sockets.
Install the bases in the casing.
Install the rubber seal in position.
Install the cable clamps around the cable harness and the rubber seal.
Installing the connector on the transmission
Installing the gear-shift position sensor
Tighten the sensor screws lightly.
Install the rubber washer, lock washer and the nut on the gear shift linkage rod connection.
Tighten the nut.
Lock the nut with the lock washer.
Adjusting the gear-shift position sensor
See: Checking and Adjusting the Gear-Shift Position Sensor
Installing the gear-shift position sensor, continued
Install: