C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Ignition off.
Removing the air cleaner (ACL) housing and intake manifold
Disassembling the connector for the transmission output speed sensor. Removing the sensor
Remove the nut for the cable duct/bracket.
Unhook the components.
Clean thoroughly around transmission output speed sensor. Remove the sensor.
Lubricating the O-ring for the new transmission output speed sensor.
Installing the sensor
Install the sensor. Tighten to 5.5 Nm.
Install:
-
the bracket and cable duct. Tighten to 5.5 Nm
-
the connector.
