C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Constant Velocity Joint: Procedures
Adapting A Drift
Adapting a drift
To facilitate removal of the CVJs, grind a drift as shown in the illustration. Rounding the lower edge (R) means that the drift will not catch in the drive
shaft circlip groove. The sharper angle (approx. 60°) means that drift has a greater surface contact with the inner ring.
Greasing and Installation
Greasing and installation
Greasing and installation
Lubricate the constant velocity joint thoroughly.
