C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Caution! Ensure that there is no grease on the mating surfaces between the boots and the constant velocity joints and the shaft.
Remove excess grease using denatured alcohol.
Pull on the boots on the constant velocity joints and make sure that they are correctly positioned on the drive shaft.
Install new clamps.
-
Use pliers 951 2619 Pliers See: Tools and Equipment/951 2619 Pliers.
Note! See Drive shafts, installing See: Service and Repair/Drive Shafts, Installing for drive shaft installation. The method is the same for the
left and right drive shaft.