C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Seals and Gaskets: Service and Repair
Seal CV joint housing, replacing
Removal
Preparations
Remove the drive shaft on the right-hand side, see Drive shaft right, replacing See: Axle Shaft Assembly/Service and Repair/Drive Shaft Right,
Replacing , and the left-hand side, see Drive shaft left, replacing See: Axle Shaft Assembly/Service and Repair/Half Shaft, Left, Replacing.
Removing the sealing ring for the CV joint housing from the wheel spindle
Carefully remove the sealing ring.
Note! The sealing ring will be used again during installation.
Installation
