C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Installing the gear selector cable
Install:
-
the large connector and the bracket. Tighten the smaller connector. Tighten to 25 Nm.
Connect the large connector
-
the tie straps for the cable harness
-
the cable on the lever
-
the screws for the bracket. Tighten to 25 Nm.
Installing engine compartment components
Install:
-
the battery shelf
-
the Air Cleaner (ACL) housing and the intake manifold
-
the battery.
Checking Diagnostic Trouble Codes (DTCs)
Check and erase any Diagnostic Trouble Codes (DTCs).
Replacing the transmission input speed sensor S80
Removing engine compartment components
