S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
"rPt" Error Code.
"EEEE" Error Code.
If an incorrect code has been entered "rPt" or " EEEE" is displayed. Enter the correct code. After three unsuccessful coding attempts the set will lock
and remain locked for two hours. "OFF" is displayed.
After two hours have elapsed, re-enter the correct code.
During the two hours waiting period:
-
the battery must be connected.
-
the ignition key must be turned to position I
-
The unit must be turned on
Make sure the headlights are turned off to help prevent battery drain. Enter the code again once this time has elapsed.
Removing Radio Panel
Removing the radio panel
-
Make a note of the radio code.
-
Press in the catches to release them.
-
Grip the catches. Pull the radio out.
-
Disconnect the connector.
-
If required: Remove the compartment from the center console.
Remove:
