volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Body and Frame|Key > < Lock And Handle For The Front Side Door|Page 11591
Page 7
background image

 A, B and C

Install:

-

the guide in the door

-

two clips.

Press the two rods into the guide.
 D

Press the locking rod into the lug.
Install the two screws in the handle.
Check the function.

Note! If necessary, adjust the length of the connecting rod using the adjusting block on the rod.

Installing the door insulation

Install:

-

the run-off profile according to  Run-off profile See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal
and Replacement/Side Door With Controls 

-

the upper tie strap in the door panel

-

the door panel according to  The panel for the rear side door See: Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and
Repair/Removal and Replacement.

Body and Frame|Key > < Lock And Handle For The Front Side Door|Page 11591