S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
M3 = 175 mm
M4 = 40 mm
Secure.
Weld into place.
Replacing The End Panel
Replacing the end panel
The extent of the damage may vary and with it the number of components that need to be removed.
See Front section See: Service and Repair/Removal and Replacement/Bodywork Preparations/Front Section.
Removing the end panel
Drill or grind out the spot welds.
Pry off the component.
Grind clean.
Apply welding primer.
Adjust the end panel.
Hint: Use the painted edges from the removed member as an aide when aligning.
Center the panels at (1).
Installing the end panel