S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Note! Do not remove the grease.
-
Assemble the mechanism.
-
Lift the rail at the front.
-
Slide the mechanism (in the ventilation position) into the rail.
-
Position the rail by moving it outwards, pressing it and then pushing it inwards behind the assembly clip.
Note! Watch out for the cable guide sleeve.
-
Install both bolts (front and back). Tightening torque: 3 Nm.
-
Fit the cable in the gripper.
-
Press the inner cable into the sleeve
-
Check that both levers are in the tilt position.