S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
-
Install the knob on the side (1). Install the ring. Turn the knob clockwise until resistance is felt. Pull the knob out (light press) while turning
counter-clockwise a little further.
-
Install the armrests if applicable. Press in the snap ring.
-
Reinstall the seat in the vehicle.
-
Check the function.
Backrest Mechanical Cable For the Power Seat, Replacing
Backrest Mechanical Cable For The Power Seat, Replacing
NOTE: The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the essential
information in the illustrations is always correct.
Removing Backrest Mechanical Cable, Power Seats
