S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
-
Note the positions of the springs and the lumbar support.
-
Remove the 2 screws. Remove the mechanism.
-
Remove the lumbar strap.
Installing The Adjustable Lumbar Support
Hook the lumbar support into the springs in the correct position.
Position the mechanism. Secure with screws. Tighten to 5 Nm.
Installing The Backrest Padding
-
Position the padding.
-
Hook the springs into place.
With Heater Panel:
-
Install the heater pad.
-
Route and secure the cable.
-
Connect the connectors.
Installing The SIPS Airbag On The Backrest