S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Before securing the upholstery, check the following:
-
that any remnants of the half moon clips have been removed
-
that the rods (steel or plastic wires in the pockets inside the upholstery) are in position and not protruding outside their pleat. Also check that the
rod, or the rod pleat, is not bent and in contact with the heater pad. Adjust if necessary
-
that the seam and the rod and pleat are positioned in the channel so that they are not in contact with the heater pad
-
that the plastic wires are the correct length and cannot affect the function of the heater pad.
Installing Upholstery
Install the upholstery, adjustment knobs and head restraint.
Testing The Bonding
