S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Weatherstrip: Adjustments
Rubber seals and seams, check and adjust
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Check
Rubber seal, check
Check the rubber seal for the following:
-
that it is not damaged
-
that the air valves are open
-
that the profile is properly installed the entire way across the body seam and is not open
-
V40: that the white dot (A) points up
-
S40: that the white dot (A) points down
-
that the wide lip (B) is installed on the inside
Check the closing/adjustment of the rear doors and tailgate/trunk. See Trunk lid See: Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Removal and Replacement/Trunk Lid (S40 (-04)) or Tailgate (V40).
