S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Check the brake disc surface. Check the lateral runout of the brake disc if the disc is uneven. Replace the brake disc if it is worn or grooved.
NOTE: Minimum disc thickness = 8.4 mm. If installing new brake pads, the minimum disc thickness must be at least 8.9 mm.
Checking the locating pins for the rear brake calipers
Check the rubber sleeves on the locating pins. Replace if necessary. If necessary, lubricate the locating pins using Volvo silicon grease (P/N 1161325-4).
Insert the locating pins in the rubber sleeves. The locating pins must slide into the sleeves easily.
Rotating the brake piston backwards
