S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Note! Check that there is no dirt in the terminals.
Install:
-
The master cylinder. The lug in the power brake booster must be correctly positioned in the master cylinder
-
the brake pipes on the master cylinder. Tighten by hand
-
the 2 nuts for the master cylinder. Tighten to 20 Nm
-
the connector for the brake fluid level sensor
-
the hose for the clutch cylinder.
Filling the brake fluid reservoir
Fill the brake fluid reservoir. Turn the cap nut for the brake pipes so that they are sealed when the brake fluid begins to seep out.
Tighten to 14 Nm.
Installing the relay box
