S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
-
The screws for the soundproofing panel under the dashboard on the driver's side
-
the soundproofing panel. Note the wiring for the courtesy lighting
-
the spring, washer and bolt from the support rod
-
the 4 nuts for the power brake booster.
Remove from the engine compartment:
-
The vacuum hose on the power brake booster
-
the power brake booster. Do not damage the power brake booster
-
the seal.
Installation
Installing the power brake booster
Clean the power brake booster and the cowl panel.
Install in the engine compartment:
-
A new gasket on the power brake booster
-
the power brake booster. Do not damage the power brake booster.
Ensure that the support rod is correctly positioned on the brake pedal
-
the vacuum hose.
Install in the passenger compartment:
