S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
-
The vacuum pump
-
the mounting nuts. Ensure that the spacers are in place in the rubber mounting. Tighten to 6 Nm
-
the quick-release connector for the vacuum hose
-
the electrical terminal.
Finishing
Install:
-
the cover for the air cleaner
-
the switch for the mass air flow (MAF) sensor
-
the intake hose. Tighten the hose clamp
-
the relay box. Tighten the screws. Tighten to 6 Nm
-
the battery lead.
CAUTION: Always connect the battery lead.
Activate the anti-theft radio code.
Check
Check the function of the vacuum system.
Check and erase any diagnostic trouble codes (DTCs).