S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Replace fuse no. 22 (10 A) with the 15 A fuse. Clean the area where the label will be applied. Install the label on the inside of the cover
Reinstall the cover on the fuse box.
14.
Installing components
Note!
Do not connect the battery negative lead.
Install:
-
the air cleaner (ACL)
-
the protective cover for the throttle housing
-
the protective cover from the connector bracket fire wall
-
the battery and battery clamp
-
the protective cover over the battery
-
the battery positive lead.
15.
Connecting the battery and checking function
Turn the ignition to position II.
Warning!
Ensure that no one is in the car when the battery is connected.
Connect the battery negative lead.
Re-enter the radio code.
Set the car clock to the correct time.
Function test:
Turn the ignition off press down the brake pedal a few times until there is no longer any negative pressure (vacuum) in the brake servo.
Turn the ignition key to position II and listen for the operation of the additional vacuum pump. The vacuum pump stops after a short time.
