S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Checking correct operation of ABS system
Read out the DTCs.
Carry out a test-drive and check whether the ABS warning light goes out.
Read out and check whether there are any DTCs stored.
Removing/Fitting The Rear Pulse Wheel
Replacing the rear pulse wheel
Removal
Removing the wheel hub
Switch off the ignition.
Remove the wheel hub according to Replacing rear wheel hubs See: Maintenance/Wheels and Tires/Wheel Hub/Service and Repair/Replacing Rear
Wheel Hubs
Replacing the rear pulse wheel
-
Remove the 2 screws
-
Remove the pulse wheel.
Installation
Installing the wheel hub, brake caliper and wheel
-
Clean the hub. Install the new pulse wheel
-
Tighten to 25 Nm
-
Install the wheel hub, the brake caliper and wheel according to Replacing rear wheel hubs See: Maintenance/Wheels and Tires/Wheel
Hub/Service and Repair/Replacing Rear Wheel Hubs.
Final check
-
Read off and erase any diagnostic trouble codes (DTCs)
-
Test drive the car according to Test driving See: Testing and Inspection/Initial Inspection and Diagnostic Overview
