S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Turn the crankshaft in the direction of engine rotation until the next marking In2/Ex1 is opposite the flange on top of the cylinder head. Perform the
test measurement according to the previous description.
Continue by measuring the remaining valve clearances according to the markings on tool 999 5753.
Finishing
Note: For tightening torques not in the text. See: Specifications/Mechanical Specifications
Install:
-
the plugs for the test holes. Tighten to 20 Nm
-
the ignition coils according to the earlier markings
-
the ground connections
-
the connector for the variable valve timing solenoid.
Remove tool 999 5753.
Install:
-
a new cover over the intake camshaft
