S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
-
the screws for the servo holder
-
the engine mounting screws
-
the engine mounting
-
the lower timing cover.
Position the engine according to the marking
-
Remove the right front wheel.
-
Position the upper timing cover.
-
Turn the crankshaft until the markings on the crankshaft and camshaft pulley correspond.
-
Turn the crankshaft a further 1/4 turn clockwise and then back again until the markings correspond. The markings are shown in the above figure.
Remove the upper timing cover.
Removing the timing belt
