S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Finishing
Remove the lifting beam and lifting hook.
Install:
-
the power steering reservoir
-
the metal bracket for the power steering hose on the rotation protection for the auxiliaries belt
-
the auxiliaries belt
-
turbocharged engines: the right engine cover and the cover over the right headlamp unit
-
the rear camshaft cover
-
the trigger wheel. Tighten to 17 Nm
-
the camshaft position (CMP) sensor housing. Tighten to 5 Nm
-
the cable duct
-
the brake servo vacuum hose
-
the hose between the intake manifold and air cleaner (ACL) housing
-
the blind cover plug
-
the mounting screws for the starter motor
-
the support between the cylinder block and the intake manifold
-
the front air baffle
-
the cable from the battery negative terminal.
Checking work
Function test:
Test drive the car.
