S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
-
the support between the cylinder block and the intake manifold.
-
the starter motor mounting screws.
Place the starter motor to one side.
Remove the blind cover plug and the sealing washer.
Turn the crankshaft clockwise slightly to avoid the adjustment tool being in the wrong position.
Install gauge 999 5451 ADJUSTMENT TOOL See: Tools and Equipment/999 5451 Adjustment Tool. Make sure that the gauge bottoms against the
engine block.
Turn the crankshaft back counter-clockwise until it stops against the drift.
Check that the marking on the crankshaft timing gear pulley corresponds with the marking on the oil pump.
Installing camshafts' timing gear pulleys
