S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
-
The belt shall be tight between the inlet camshaft gear, idler gear, and crankshaft.
-
Fix the belt tensioner centre screw in position and turn the belt tensioner eccentric counter clockwise until the tensioner indicator passes the
marked position.
Then turn the eccentric back so that the indicator reaches the marked position in the centre of the window
-
Hold the eccentric secure and tighten the centre screw. Torque tighten to 20 Nm.
Tightening timing gear pulley
Tighten the centre screw on the timing gear pulley with VVT. Tighten to 90 Nm.
Install the plug. Tighten to 35 Nm.
Install the third screw on the camshaft without VVT. Tighten to 20 Nm.
Remove the adjustment tools.
Check
-
Press the belt to check that the indicator on the tensioner moves easily.
-
Position the upper timing cover.
-
Turn the crankshaft two turns. Check that the markings on the crankshaft and camshaft pulley correspond
Note! Check that the indicator on the belt tensioner is within the marked area.
-
Remove the upper timing cover.
Installing the timing covers
