S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Remove lifting beam and lifting hook.
Install:
-
the servo reservoir.
-
servo hose's metal console on the auxiliary unit belt's rotation guard.
-
the auxiliaries belt
-
turbo engines: right engine protection cover as well as the cover over right headlight unit.
-
rear camshaft cover.
-
blinder. Tightening torque 17 Nm.
-
camshaft sensor housing. Tightening torque 5 Nm.
-
cable channel.
-
brake servo's vacuum hose.
-
hose between inlet pipe and air filter housing.
-
the blind cover plug.
-
the starter motor mounting screws.
-
the support between the cylinder block and the intake manifold.
-
front air baffle.
-
the cable from the battery's negative terminal. First read Note when disconnecting and connecting the battery lead See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Checking work
Function test:
-
Carry out a road test.