S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
-
the upper section of the air cleaner (ACL) housing and hose
-
the pipe screw for the water-heated crankcase ventilation
-
the auxiliaries belt.
Exposing the cable harness
Remove:
-
the screw from the ignition coil ground
-
the camshaft position (CMP) sensor.
Remove:
-
the ignition coil connectors.
Place the cable harness to one side.
Unscrew the cable duct from the rear edge of the cylinder head and the throttle body (TB) bracket. Release the rear edge of the cylinder head from the
cables and hoses.
Remove:
-
the connector for the engine coolant temperature sensor
-
the injector connectors.
Place the cable duct and cable harness to one side.
Mark up and remove the ignition coils and ignition cables.
Remove:
-
the rear cover for the camshaft
-
the camshaft position (CMP) sensor housing
-
the trigger wheel.
Removing the intake manifold
Remove:
