S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Get help to lift off the cylinder head.
Caution: Do not damage the mating surfaces.
When replacing or working on the cylinder head
Remove:
-
the thermostat housing
-
all components which will be transferred to the new cylinder head
-
gaskets.
Caution: Do not damage the mating surfaces.
Cleaning the gasket face
Clean the gasket faces for:
-
the coolant bypass channel
-
the intake manifold
-
the cylinder block
-
camshaft cover.
When replacing or machining the cylinder head, clean the gasket faces for:
-
the manifold. Check that the studs are tightened
-
thermostat housing.
Blow the oil ducts clean.
Caution: Do not use a metal scraper. Use a soft putty knife and gasket solvent 11614401 if necessary. The surfaces must be completely clean in order
to form a complete seal.
Warning: Use a fume hood or extractor when using gasket solvent.
Installing the cylinder head
Note: For tightening torques not in the text See: Specifications/Mechanical Specifications
