S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Aligning the crankshaft
Remove the blind cover plug.
Turn the crankshaft clockwise slightly to avoid the adjustment tool being in the wrong position.
Install adjustment tool 999 5451. Ensure that the adjustment tool bottoms out against the cylinder block.
Turn the crankshaft back counter-clockwise until it stops against the drift.
Check that the marking on the crankshaft timing gear pulley corresponds with the marking on the oil pump.
When replacing or working on the cylinder head
Install:
-
the thermostat housing. Use a new gasket
-
the manifold. Use new gaskets. Lubricate the studs using paste 116 1408.
Caution: Do not damage the mating surfaces.