S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Cylinder Head Gasket: Removal and Replacement
Cylinder head/gasket, replacing
Special tools:
999 5454 PRESS TOOL See: Tools and Equipment/999 5454 Press Tool
951 2666 Replaced by 9997298 See: Tools and Equipment/951 2666 Replaced by 9997298
999 5670 Pliers See: Tools and Equipment/999 5670 Pliers
999 5451 ADJUSTMENT TOOL See: Tools and Equipment/999 5451 Adjustment Tool
951 2050 BEVEL PROTRACTOR See: Tools and Equipment/951 2050 Bevel Protractor
951 2767 Roller See: Tools and Equipment/951 2767 Roller
999 5452 CAMSHAFT ADJUSTMENT TOOL See: Tools and Equipment/999 5452 Camshaft Adjustment Tool
999 5718 Drift See: Tools and Equipment/999 5718 Drift
999 5719 Drift See: Tools and Equipment/999 5719 Drift
999 5450 PUNCH See: Tools and Equipment/999 5450 Punch
Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.
Preparation
Remove the cable from the battery negative terminal. First read Note when disconnecting and connecting the battery lead See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Coolant, draining
-
Remove the front air baffle.
-
Open the engine nipple.
-
Drain the coolant into a container.