S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Remove:
-
upper radiator hose with thermostat housing's cover.
-
the screw holding the dip stick pipe to the intake manifold
-
connectors from air assistance valve and throttle position sensor.
-
crankcase ventilation's hose from camshaft cover.
-
vacuum hoses from inlet pipe, mark up location.
-
console between servo pump/inlet pipe.
-
screws that hold inlet pipe to the cylinder head.
-
the intake manifold
Timing belt pulley, removing
Remove the timing belt pulley according to Camshaft seals, replacing See: Camshaft Oil Seal/Service and Repair/Removal and Replacement.
Remove the engine mount front for cylinder head.
Coolant pump's inlet pipe, disconnecting