S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Clean the gasket faces for:
-
the coolant bypass channel
-
the intake manifold
-
the cylinder block
-
camshaft cover.
When replacing/reworking of the cylinder head, clean the gasket faces for:
-
the manifold. Check that the studs are tightened
-
the thermostat housing
Blow the oil ducts clean.
Caution! Do not use a metal scraper. Use a soft putty scraper or gasket dissolver 1161440-1. The surfaces must be completely clean to seal
tightly.
Warning! Use a fume hood or extractor when using gasket solvent!
Installing the cylinder head
Note! For tightening torques not in the text, see Tightening torques for 4-cylinder gasoline engines See: Specifications/Mechanical
Specifications/Tightening Torque.
Note! To ensure that there is no exhaust leakage, see: Flanged joint, assembling See: Exhaust System/Exhaust Pipe/Service and
Repair/Removal and Replacement/Flanged Joint, Assembling.
Aligning the crankshaft
