S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Check that the marking on the crankshaft timing belt pulley matches with the marking on the oil pump.
When replacing or working on the cylinder head
Install:
-
thermostat housing. Use a new gasket.
-
the manifold. Use new gaskets. Lubricate the studs using paste 116 1408
Caution! Do not damage the mating surfaces.
Installing the cylinder head
Install a new cylinder head gasket.
Install the cylinder head.
Ensure that no wiring or hoses are trapped between the cylinder head and cylinder block.