S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Applying liquid gasket.
Wipe the oil film off the mating surfaces on the camshaft cover and cylinder head.
Install new O-rings around the spark plug wells on the cylinder head.
Apply liquid gasket 116 1059 on the camshaft cover.
Use roller 951 2767 Roller See: Tools and Equipment/951 2767 Roller.
The surface must be completely covered without any excess.
Caution! Make sure that liquid gasket does not end up in coolant or oil channels.Only a thin layer of liquid gasket is needed.
Camshaft cover, installing
