S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Install the new seal for the camshaft without VVT using drift 999 5719 Drift See: Tools and Equipment/999 5719 Drift.
Install the new seal for the camshaft with VVT using drift 999 5718 Drift See: Tools and Equipment/999 5718 Drift.
Install the screw holding the inner timing cover to the cylinder head.
Camshafts' timing belt pulley, installing
Install the camshafts' timing belt pulley according to Camshaft seals, replacing See: Camshaft Oil Seal/Service and Repair/Removal and Replacement.
Installing engine mounting
Place engine mount on cylinder head. Screw down the engine mount against the cylinder head. Tighten with 35 Nm and then tighten through an angle of
75°, one movement without interruption.
Right engine mount, installing